This is my modification to allow for an Accucraft Lyn to go through an R1 radius. It still does not allow it to go through back to back R1 points but it will go through back to back R3.

It does detract from the looks but in my case I extended the front pony truck platform which tend s to hide the modification.

 

The skirt on the front pony truck platform inhibits the throw on the pony truck. There is a cutout in the frame and what I did was to match the cutout in the skirt.

 

The photos will tell a thousand words so they say.

 

 

 

 

 

 

Now you should have the picture (corgi) aka Ron.